epson stylus photo 1400 paper feed problem

* If the trouble still occurs after doing all measures described in the right-hand columns, replace the CR Motor with a new one. Overview 65 Vertical or horizontal banding / Color shading The printout has banding vertical to the CR moving direction and is not evenly colored. 9 by pressing the buĮpson Stylus Photos 1390 EPSON Stylus Photo 1390/1400/1410 Revision B TROUBLESHOOTING

The LCD of the Measuring Tool displays No. Secure the PF Motor to the Printer Mechanism, and install the Drive Belt on the Gear of the PF Scale and the Pinion Gear of the PF Motor. Print Quality Troubles Observed Faults Details of the Fault Faulty Part/ Part Name Check Point Remedy Dot missing and mixed colors Inks are not ejected from the Print Head tĮpson Stylus Photos 1390 EPSON Stylus Photo 1390/1400/1410 Revision B ADJUSTMENTĪdjustment 138 5.2.1.1 PF Belt Tension Adjustment Method 1. Overview 62 3.1.2 Troubleshooting based on Observed Faults This section provides troubleshooting procedures based on observed faults such as print quality troubles and abnormal noise. Connect the CSIC FFC to the CSIC Board Connector and Main Board Connector CN15. Check that the CSIC FFC is connected to the CSIC Board Connector and Main Board Connector CN15. Overview 51 At power-on After the Carriage has detected the HP, an error is displayed on the LED and STM3. Printing Area (BordĮPSON Stylus Photo 1390/1400/1410 Revision B TROUBLESHOOTING

Border-free printing is available on the following media sizes:  Paper width  54, 55, 89, 100, 127, 210 mm  4, 5, 8, 8.5 inch Figure 1-4. Printing area D is supposed to be trimmed and may not be printed. 3x8 (6☑ kgf.cm) Waste Ink Pads  Route the Waste Ink Tube as shown below.ĮPSON Stylus Photo 1390/1400/1410 Revision B PRODUCTĭESCRIPTION Printing Area 12 Printing area (Border-free printing) Figure 1-4 shows the printing area (A, B, C, and D) when border-free printing is selected. Remove the 11 Waste Ink Pads from the Lower Housing. 3x8 screw that secures the Waste Ink Tube. Release the tab that secures the Front Paper Guide from the Main Frame and slide the Front Paper Guide to the left, andĪSSEMBLY Disassembly/Assembly Procedures 84 4.2.2 Waste Ink Pad 1. Return the Carriage Unit to its home position. Slide the Front Paper Eject Roller to the left, and remove the Left Bushing 8 from the Main Frame. EPSON Stylus Photo 1390/1400/1410 Revision B DISASSEMBLY ANDĪSSEMBLY Disassembly/Assembly Procedures 118 6.

Epson stylus photo 1400 paper feed problem